ONUMEN foldable LED screen features a separable architecture with an external power supply, allowing the display panel to remain ultra-thin, lightweight, and easy to install.
Slim, lightweight and foldable
Cabinet-free design, fanless operation and zero noise
Low heat generation, energy efficient and high refresh rate
The separable structure simplifies installation and improves portability.
External power supply with separable architecture keeps the display ultra-thin, lightweight and foldable.
Ultra-thin design: 8–15 mm
Lightweight structure: 10–15 kg/m²
360° foldable design for easier transportation and storage
Dual connector design (soldered connector + spare plug-in connector) improves reliability and simplifies module replacement.
Dual module fixation with magnet and screw ensures stable and secure installation.
Standardized installation structure reduces installation time and labor cost.
Supports both front and rear maintenance.
Prepare the "hanging beam" (hanger).
Hang the headers of all the flexible organic LED screens on the hanging beam in turn and fix them properly.
Fix the screen control boxes (power supply boxes) on the hanging beam in turn.
Properly connect the control cables between the control boxes and their corresponding screens.
Connect the whole screen power cord to the AC power supply.
Connect the whole screen signal wire to the transmitting box.
Adjust the spacing between each two screen modules, and connect each two screen modules with four-corner connecting sheets to ensure seamless splicing.
Power on, light up and debug.
Prepare the mounting frame that can be absorbed by the magnet for installing the screen.
Attach each foldable LED to the mounting bracket in turn, and fix the screen to the mounting bracket with screws if necessary.
Place the electric cabinet or control box in a safe place.
Connect the control line between the electric cabinet or control box and the screen.
Connect the whole screen power cord to the AC power supply.
Connect the whole screen signal line to the transmission box.
Adjust the spacing between each two screen modules, and connect each two screen modules with four corner connectors to ensure seamless splicing.
Power on, light up and debug.
中文
English
日本語
한국어
français
Deutsch
Español
русский
português
العربية
Nederland
